QWATRO WATER TREATMENT TECHNOLOGY

FP100™
Steam Boiler Treatment for Food Plants

FP100™ is a totally balanced boiler water treatment that protects against scale, corrosion, pitting and rust in boilers and steam lines. FP100™ controls water hardness through the use of polymers. It also prevents sludge formation and scaling while controlling the effect of dissolved oxygen and acid attack in condensate lines. FP100™ is specially formulated and registered for use in Food Plants. Available in 30 Ltr. and 210 Ltr.

QT Floc™
Waste Water Treatment

You no longer have to waste money on waste water disposal. QT Floc™ is an amazing new product from Qwatro™. Designed specifically for industries that require their waste to be treated prior to disposal, QT Floc is a highly effective waste stabilization agent that will help your industry or municipality meet new waste disposal regulations at a very economical cost.

QT Floc's unique blend of organic and inorganic coagulants and reactants creates the ability to effectively break down oil emulsions, complex heavy metals, and flocculate suspended solids into a non-leachable sludge which can then be safely placed in waste disposal areas. A tremendous savings. You no longer have to have your entire wastewater hauled away, and the sludge can then be disposed of in a landfill site. One step removal of heavy metals, oils and suspended solids.

Step 1: QT Floc™ is added to Dirty Waste Water	Step 2: Immediately works to congeal impurities	Step 3: Congealed waste goes to bottom of tank for easy disposal

The Advantages of QT Floc™

1. Only one mixing tank
2. Only one additive - QT Floc™!
3. Easily dewatered sludge – passing leachate tests, qualifying for non-hazardous disposal criteria
4. Unlike traditional treatments, QT Floc does not require multiple steps to address each contaminant
5. Traditional treatments usually entail large capital investment and multiplicity of chemical additives
6. Traditional treatments generally produce hazardous sludge resulting in high disposal costs

TOP OF THE PAGE

QT FuelAd™
Fuel Oil Additive & Conditioner

QT FuelAd guards against moisture, prevents corrosion, prevents injectors from clogging, conditions fuel flow and is economical to use. QT FuelAd improves fuel efficiency by desludging fuel tanks, cleaning injector tips and rendering contaminant’s such as water and sulphur found in various amounts in different grades of fuel oil. Available in 30 Ltr. and 210 Ltr.

QT SCAVOX™
Catalyzed Oxygen Scavenger

QT Scavox is specially formulated for the rapid and complete removal of dissolved oxygen from feed and boiler water. It is easily controlled and protects equipment against oxygen pitting and corrosion. Available in 30 Ltr. and 210 Ltr.

QT100™
Steam Boiler Treatment

QT100™ is an all in one, totally balanced boiler water treatment that protects against scale, corrosion, pitting and rust in boilers and steam lines. It also prevents sludge formation and scaling while controlling the effect of dissolved oxygen and acid attack in condensate lines.

QT100™ is economical, highly effective and and very easy to use. QT100™ is used in steam boiler systems commonly found in hospitals, schools, hotels, factories, commercial and apartment buildings. Available in 30 Ltr. and 210 Ltr.

QT200™
Complete Treatment for Boiler Hard Water

QT200™ is for use with hard water. A totally balanced boiler water treatment that protects against scale, corrosion, pitting and rust in boilers and steam lines. QT200™ controls water hardness through the use of polymers and Alkalinity Boosters. Available in 30 Ltr. and 210 Ltr.

QT240™
Organic Polymer Treatment for Closed Hot and Cold Water Systems

QT240™ is a nitrate based corrosion preventative for use in closed recirculating water heating and cooling systems. Compatible with anti-freeze it is uniquely formulated to offer complete protection against scale and corrosion for both heating and cooling closed recirculating systems where a single treatment is preferred. It is used in hot water boilers, closed hot water loops, hot water heaters, chilled water loops and diesel engine jackets. Available in 30 Ltr. and 210 Ltr.

TOP OF THE PAGE

QT404™
Boiler Washout

QT404™ is designed to clean the boiler and lines of cutting & tapping fluids and oils left behind in new boilers, older boilers that may have been recently worked on and washing out closed systems that may have suffered severe corrosion and fouling where an acid wash is not feasible. QT404 is compatible with boiler treatments. Available in 30 Ltr. and 210 Ltr.

QT410™ pH Adjuster
Alkali Control for Boilers

QT410 is a specially formulated product, used in boilers and cooling towers to increase alkalinity levels. It is used to increase pH to control corrosion. Available in 4x4 Ltr.

QT456™
Neutralizing Amine Corrosion Inhibitor

QT456 protects steam and condensate return lines and steam traps against pitting, channeling and general corrosion. QT 456 is a volatile, neutralizing amine Qwatro QT600 type inhibitor for use in steam boilers. The amines neutralize corrosive carbonic acid. All common metals (iron, steel and zinc) are protected. Do not use QT456 in the processing of milk or milk products. Available in 30 Ltr. and 210 Ltr.

QT600™
Heating and Cooling System Corrosion Inhibitor

Uniquely formulated to offer complete protection against scale, rust and galvanic corrosion for both heating and cooling closed recirculating systems where a single treatment is preferred; QT600 is used in hot water boilers, closed hot water loops, hot water heaters, chilled water loops and diesel engine jackets. This unique molybdate based product will also reduce wear of impeller pumps. Available in 30 Ltr. and 210 Ltr.

TOP OF THE PAGE

QT800™
Organic Cooling Tower Treatment

QT800 is an all organic blend of scale and corrosion inhibitors that is designed for open recirculation cooling systems.The product has five different inhibitors. QT800 will allow for increased cycling without pH control and will slowly remove existing scale and restore optimum heat transfer efficiency. This product is easy to use and simple to control. Available in 30 Ltr. and 210 Ltr.

For more information on QT800, click here.

QT850™
Cooling Tower Algaecide/Slimicide

QT850 is designed to control algae, bacterial and fungi growth in cooling water systems. Non-foaming microbiocide effective at both acid and alkaline ph, QT850 will prevent fouling of tower and condensers. QT850 improves heat transfer and reduces the risk of “sick building syndrome” Available in 30 Ltr. and 210 Ltr.

QT880™
Cooling Tower Fungicide/Slimicide/Bactericide

Liquid slimacide, fungicide and bactericide for use in open recirculating systems. Very economical dilutions up to 1:20,000. It is recommended to alternate biocide so that micro-organisms do not build up a resistance to any particular biocide. The proper use of biocides prevent fouling, legionaires disease and ensures proper functioning of the cooling system. Available in 30 Ltr. and 210 Ltr.

QT1100™
Safe Acid Scale Remover

QT1100 is a special blend of inhibited acids and detergents to allow penetration of scale for quick release from the surface. QT1100 has no objectionable odours compared to straight acid cleaners. Available in 30 Ltr. and 210 Ltr.

TOP OF THE PAGE